Note: Switch panels are made-to-order, and may take up to one month to ship.
This is a 3D-printed part (made of PETG), with a CNC-cut, black, anodized aluminum faceplate complete with engraved text/icon. The push-button switch is SPST, ON/OFF style (latching or momentary based on your selection), and is rated for 12V/5A. The switch has an LED-illuminated ring in the color of your choosing (red, blue, amber, green, or white.)
Installation is simple: remove the USB/AUX module (it slides out from the back), and slide the switch insert in, firmly wedging it into place (it is designed to be a close fit, so keep it as parallel as possible when inserting it or it will be difficult to snap into place).
This switch can be integrated with Gerald’s Trac-Box, which can control a host of ancillary functions, such as Pedal Dance, ABS Disable, Radiator Fans, TPMS Light, Seatbelt Chime, and even Auto Door Locks!
A pigtail harness is included with this panel. Wiring is going to be different for each person depending on what they are wiring, and how they are doing it, so that is left up to you to do. The switch has 5 terminals: NC, NO, C, LED(+), LED(-). You can use these terminals (or the wire leads coming out of the pigtail, if you choose to use it) to configure the switch to operate in different ways. You don't always use ALL 5 leads). For example, the LED can be on ALL the time, or only when the switch is activated. A guide is included with your order to help you in this regard.
This seems like a simple part, and it more-or-less is, but there are a lot of steps involved in making it. These take time to ship simply because this is a side project I do in my spare time, and my free time is limited, what with work, and autocross, and having a life and all that! The reality is they will probably ship within a week or two, but I don’t like to over-promise on how quickly folks will receive something. I do provide a tracking number when I ship though!
